Biomechanical stimulation promotes blood vessel growth despite VEGFR-2 inhibition.

BACKGROUND: Angiogenesis, or the growth of new vasculature from existing blood vessels, is widely considered a primary hallmark of cancer progression. When a tumor is small, diffusion is sufficient to receive essential nutrients; however, as the tumor grows, a vascular supply is needed to deliver oxygen and nutrients into the increasing mass. Several anti-angiogenic cancer therapies target VEGF and the receptor VEGFR-2, which are major promoters of blood vessel development. Unfortunately, many of these cancer treatments fail to completely stop angiogenesis in the tumor microenvironment (TME). Since these therapies focus on the biochemical activation of VEGFR-2 via VEGF ligand binding, we propose that mechanical cues, particularly those found in the TME, may be a source of VEGFR-2 activation that promotes growth of blood vessel networks even in the presence of VEGF and VEGFR-2 inhibitors. RESULTS: In this paper, we analyzed phosphorylation patterns of VEGFR-2, particularly at Y1054/Y1059 and Y1214, stimulated via either VEGF or biomechanical stimulation in the form of tensile strains. Our results show prolonged and enhanced activation at both Y1054/Y1059 and Y1214 residues when endothelial cells were stimulated with strain, VEGF, or a combination of both. We also analyzed Src expression, which is downstream of VEGFR-2 and can be activated through strain or the presence of VEGF. Finally, we used fibrin gels and microfluidic devices as 3D microtissue models to simulate the TME. We determined that regions of mechanical strain promoted increased vessel growth, even with VEGFR-2 inhibition through SU5416. CONCLUSIONS: Overall, understanding both the effects that biomechanical and biochemical stimuli have on VEGFR-2 activation and angiogenesis is an important factor in developing effective anti-angiogenic therapies. This paper shows that VEGFR-2 can be mechanically activated through strain, which likely contributes to increased angiogenesis in the TME. These proof-of-concept studies show that small molecular inhibitors of VEGFR-2 do not fully prevent angiogenesis in 3D TME models when mechanical strains are introduced.

Local SARS-CoV-2 Peptide-Specific Immune Responses in Lungs of Convalescent and Uninfected Human Subjects.

Multi-specific and long-lasting T cell immunity have been recognized as indicators for long term protection against pathogens including the novel coronavirus SARS-CoV-2, the causative agent of the COVID-19 pandemic. Functional significance of peripheral memory T cells in individuals recovering from COVID-19 (COVID-19 + ) are beginning to be appreciated; but little is known about lung resident memory T cells (lung TRM) in SARS-CoV-2 infection. Here, we utilize a perfused three dimensional (3D) human lung tissue model and identify pre-existing local T cell immunity against SARS-CoV-2 proteins in lung tissues. We report ex vivo maintenance of functional multi-specific IFN-γ secreting lung TRM in COVID-19 + and their induction in lung tissues of vaccinated COVID-19 + . Importantly, we identify SARS-CoV-2 peptide-responding B cells and IgA + plasma cells in lung tissues of COVID-19 + in ex vivo 3D-tissue models. Our study highlights the importance of balanced and local anti-viral immune response in the lung with persistent induction of TRM and IgA + plasma cells for future protection against SARS-CoV-2 infection. Further, our data suggest that inclusion of multiple viral antigens in vaccine approaches may broaden the functional profile of memory T cells to combat the severity of coronavirus infection.

Utilization of a 3-D tissue engineered model to investigate the effects of perfusion on gynecologic cancer biology.

Among gynecologic malignancies, ovarian cancer (OC) has the poorest survival rate, and its clinical management remains challenging due to the high rate of recurrence and chemoresistance. Improving survival for these patients is critical, although this requires the ability to translate preclinical studies to actual patient care: bench to bedside and back. Our objective was to develop a preclinical model that accurately represents tumor biology and its microenvironment. We utilized SKOV-3, OVCAR-8, and CS-99 cell lines to show that this model was suitable for in vitro assessment of cell proliferation. We tested OC cells independently and in co-culture with cancer associated fibroblasts (CAFs) or immune cells. Additionally, we used patient-derived ovarian carcinoma and carcinosarcoma samples to show that the system maintains the histologic morphology of the primary tissue after 7 days. Moreover, we tested the response to chemotherapy using both cell lines and patient-derived tumor specimens and confirmed that cell death was significantly higher in the treated group compared to the vehicle group. Finally, we immune profiled the 3-D model containing patient tissue after several days in the bioreactor system and revealed that the immune populations are still present. Our data suggest that this model is a suitable preclinical model to aid in research that will ultimately impact the treatment of patients with gynecologic cancer.

Layer-By-Layer Fabrication of Large and Thick Human Cardiac Muscle Patch Constructs With Superior Electrophysiological Properties.

Engineered cardiac tissues fabricated from human induced pluripotent stem cells (hiPSCs) show promise for ameliorating damage from myocardial infarction, while also restoring function to the damaged left ventricular (LV) myocardium. For these constructs to reach their clinical potential, they need to be of a clinically relevant volume and thickness, and capable of generating synchronous and forceful contraction to assist the pumping action of the recipient heart. Design prerequisites include a structure thickness sufficient to produce a beneficial contractile force, prevascularization to overcome diffusion limitations and sufficient structural development to allow for maximal cell communication. Previous attempts to meet these prerequisites have been hindered by lack of oxygen and nutrient transport due to diffusion limits (100-200 µm) resulting in necrosis. This study employs a layer-by-layer (LbL) fabrication method to produce cardiac tissue constructs that meet these design prerequisites and mimic normal myocardium in form and function. Thick (>2 mm) cardiac tissues created from hiPSC-derived cardiomyocytes, -endothelial cells (ECs) and -fibroblasts (FBs) were assessed, in vitro, over a 4-week period for viability (<6% necrotic cells), cell morphology and functionality. Functional performance assessment showed enhanced t-tubule network development, gap junction communication as well as previously unseen, physiologically relevant conduction velocities (CVs) (>30 cm/s). These results demonstrate that LbL fabrication can be utilized successfully to create prevascularized, functional cardiac tissue constructs from hiPSCs for potential therapeutic applications.

Extracellular Vesicle Mediated Tumor-Stromal Crosstalk Within an Engineered Lung Cancer Model.

Tumor-stromal interactions within the tumor microenvironment (TME) influence lung cancer progression and response to therapeutic interventions, yet traditional in vitro studies fail to replicate the complexity of these interactions. Herein, we developed three-dimensional (3D) lung tumor models that mimic the human TME and demonstrate tumor-stromal crosstalk mediated by extracellular vesicles (EVs). EVs released by tumor cells, independent of p53 status, and fibroblasts within the TME mediate immunomodulatory effects; specifically, monocyte/macrophage polarization to a tumor-promoting M2 phenotype within this 3D-TME. Additionally, immune checkpoint inhibition in a 3D model that included T cells showed an inhibition of tumor growth and reduced hypoxia within the TME. Thus, perfused 3D tumor models incorporating diverse cell types provide novel insights into EV-mediated tumor-immune interactions and immune-modulation for existing and emerging cancer therapies.

Fabrication and characterization of a thick, viable bi-layered stem cell-derived surrogate for future myocardial tissue regeneration.

Cardiac tissue surrogates show promise for restoring mechanical and electrical function in infarcted left ventricular (LV) myocardium. For these cardiac surrogates to be usefulin vivo, they are required to support synchronous and forceful contraction over the infarcted region. These design requirements necessitate a thickness sufficient to produce a useful contractile force, an area large enough to cover an infarcted region, and prevascularization to overcome diffusion limitations. Attempts to meet these requirements have been hampered by diffusion limits of oxygen and nutrients (100-200 µm) leading to necrotic regions. This study demonstrates a novel layer-by-layer (LbL) fabrication method used to produce tissue surrogates that meet these requirements and mimic normal myocardium in form and function. Thick (1.5-2 mm) LbL cardiac tissues created from human induced pluripotent stem cell-derived cardiomyocytes and endothelial cells were assessed,in vitro, over a 4-week period for viability (<5.6 ± 1.4% nectrotic cells), cell morphology, viscoelastic properties and functionality. Viscoelastic properties of the cardiac surrogates were determined via stress relaxation response modeling and compared to native murine LV tissue. Viscoelastic characterization showed that the generalized Maxwell model of order 4 described the samples well (0.7

Mechanical strain induces phenotypic changes in breast cancer cells and promotes immunosuppression in the tumor microenvironment.

Breast cancer (BCa) proliferates within a complex, three-dimensional microenvironment amid heterogeneous biochemical and biophysical cues. Understanding how mechanical forces within the tumor microenvironment (TME) regulate BCa phenotype is of great interest. We demonstrate that mechanical strain enhanced the proliferation and migration of both estrogen receptor+ and triple-negative (TNBC) human and mouse BCa cells. Furthermore, a critical role for exosomes derived from cells subjected to mechanical strain in these pro-tumorigenic effects was identified. Exosome production by TNBC cells increased upon exposure to oscillatory strain (OS), which correlated with elevated cell proliferation. Using a syngeneic, orthotopic mouse model of TNBC, we identified that preconditioning BCa cells with OS significantly increased tumor growth and myeloid-derived suppressor cells (MDSCs) and M2 macrophages in the TME. This pro-tumorigenic myeloid cell enrichment also correlated with a decrease in CD8+ T cells. An increase in PD-L1+ exosome release from BCa cells following OS supported additive T cell inhibitory functions in the TME. The role of exosomes in MDSC and M2 macrophage was confirmed in vivo by cytotracking fluorescent exosomes, derived from labeled 4T1.2 cells, preconditioned with OS. In addition, in vivo internalization and intratumoral localization of tumor-cell derived exosomes was observed within MDSCs, M2 macrophages, and CD45-negative cell populations following direct injection of fluorescently-labeled exosomes. Our data demonstrate that exposure to mechanical strain promotes invasive and pro-tumorigenic phenotypes in BCa cells, indicating that mechanical strain can impact the growth and proliferation of cancer cell, alter exosome production by BCa, and induce immunosuppression in the TME by dampening anti-tumor immunity.

Accelerating Clinical Innovation in Biomedical Engineering Education by Using a Digital Portal for Collaboration.

The rapidly changing healthcare landscape requires continuous innovation by clinicians, yet generating ideas to improve patient care is often problematic. This paper describes the development of a digital tool used in an interprofessional program designed to enhance collaborations between clinicians, undergraduate, and graduate STEM students, particularly biomedical engineering (BME). The program founders began by connecting clinicians and students through a course portal in a learning management system (LMS). They eventually secured internal funding to create an open access tool for posting and viewing problems, allowing interprofessional teams to rally around healthcare challenges and create prototypes for solving them. Results after three years of the program's inception have been encouraging, as teams have created devices and processes that have led to intellectual property disclosures, provisional patents, grant funding, and other productive interprofessional relationships. The open access tool has given clinicians and STEM students an outlet for convenient team formation around unsolved clinical problems and allowed a fluid exchange of ideas between participants across a variety of clinical disciplines.

Correction: Maturation of three-dimensional, hiPSC-derived cardiomyocyte spheroids utilizing cyclic, uniaxial stretch and electrical stimulation.

[This corrects the article DOI: 10.1371/journal.pone.0219442.].

Maturation of three-dimensional, hiPSC-derived cardiomyocyte spheroids utilizing cyclic, uniaxial stretch and electrical stimulation.

Functional myocardium derived from human induced pluripotent stem cells (hiPSCs) can be impactful for cardiac disease modeling, drug testing, and the repair of injured myocardium. However, when hiPSCs are differentiated into cardiomyocytes, they do not possess characteristics of mature myocytes which limits their application in these endeavors. We hypothesized that mechanical and electrical stimuli would enhance the maturation of hiPSC-derived cardiomyocyte (hiPSC-CM) spheroids on both a structural and functional level, potentially leading to a better model for drug testing as well as cell therapy. Spheroids were generated with hiPSC-CM. For inducing mechanical stimulation, they were placed in a custom-made device with PDMS channels and exposed to cyclic, uniaxial stretch. Spheroids were electrically stimulated in the C-Pace EP from IONOptix for 7 days. Following the stimulations, the spheroids were then analyzed for cardiomyocyte maturation. Both stimulated groups of spheroids possessed enhanced transcript and protein expressions for key maturation markers, such as cTnI, MLC2v, and MLC2a, along with improved ultrastructure of the hiPSC-CMs in both groups with enhanced Z-band/Z-body formation, fibril alignment, and fiber number. Optical mapping showed that spheroids exposed to electrical stimulation were able to capture signals at increasing rates of pacing up to 4 Hz, which failed in unstimulated spheroids. Our results clearly indicate that a significantly improved myocyte maturation can be achieved by culturing iPSC-CMs as spheroids and exposing them to cyclic, uniaxial stretch and electrical stimulation.

Convergences of Life Sciences and Engineering in Understanding and Treating Heart Failure.

On March 1 and 2, 2018, the National Institutes of Health 2018 Progenitor Cell Translational Consortium, Cardiovascular Bioengineering Symposium, was held at the University of Alabama at Birmingham. Convergence of life sciences and engineering to advance the understanding and treatment of heart failure was the theme of the meeting. Over 150 attendees were present, and >40 scientists presented their latest work on engineering human functional myocardium for disease modeling, drug development, and heart failure research. The scientists, engineers, and physicians in the field of cardiovascular sciences met and discussed the most recent advances in their work and proposed future strategies for overcoming the major roadblocks of cardiovascular bioengineering and therapy. Particular emphasis was given for manipulation and using of stem/progenitor cells, biomaterials, and methods to provide molecular, chemical, and mechanical cues to cells to influence their identity and fate in vitro and in vivo. Collectively, these works are profoundly impacting and progressing toward deciphering the mechanisms and developing novel treatments for left ventricular dysfunction of failing hearts. Here, we present some important perspectives that emerged from this meeting.

Methods to Evaluate Cell Growth, Viability, and Response to Treatment in a Tissue Engineered Breast Cancer Model.

The use of in vitro, engineered surrogates in the field of cancer research is of interest for studies involving mechanisms of growth and metastasis, and response to therapeutic intervention. While biomimetic surrogates better model human disease, their complex composition and dimensionality make them challenging to evaluate in a real-time manner. This feature has hindered the broad implementation of these models, particularly in drug discovery. Herein, several methods and approaches for the real-time, non-invasive analysis of cell growth and response to treatment in tissue-engineered, three-dimensional models of breast cancer are presented. The tissue-engineered surrogates used to demonstrate these methods consist of breast cancer epithelial cells and fibroblasts within a three dimensional volume of extracellular matrix and are continuously perfused with nutrients via a bioreactor system. Growth of the surrogates over time was measured using optical in vivo (IVIS) imaging. Morphologic changes in specific cell populations were evaluated by multi-photon confocal microscopy. Response of the surrogates to treatment with paclitaxel was measured by optical imaging and by analysis of lactate dehydrogenase and caspase-cleaved cytokeratin 18 in the perfused medium. Each method described can be repeatedly performed during culture, allowing for real-time, longitudinal analysis of cell populations within engineered tumor models.

From Microscale Devices to 3D Printing: Advances in Fabrication of 3D Cardiovascular Tissues.

Current strategies for engineering cardiovascular cells and tissues have yielded a variety of sophisticated tools for studying disease mechanisms, for development of drug therapies, and for fabrication of tissue equivalents that may have application in future clinical use. These efforts are motivated by the need to extend traditional 2-dimensional (2D) cell culture systems into 3D to more accurately replicate in vivo cell and tissue function of cardiovascular structures. Developments in microscale devices and bioprinted 3D tissues are beginning to supplant traditional 2D cell cultures and preclinical animal studies that have historically been the standard for drug and tissue development. These new approaches lend themselves to patient-specific diagnostics, therapeutics, and tissue regeneration. The emergence of these technologies also carries technical challenges to be met before traditional cell culture and animal testing become obsolete. Successful development and validation of 3D human tissue constructs will provide powerful new paradigms for more cost effective and timely translation of cardiovascular tissue equivalents.

Flow-perfusion bioreactor system for engineered breast cancer surrogates to be used in preclinical testing.

There is a need for preclinical testing systems that predict the efficacy, safety and pharmacokinetics of cancer therapies better than existing in vitro and in vivo animal models. An approach to the development of predictive in vitro systems is to more closely recapitulate the cellular and spatial complexity of human cancers. One limitation of using current in vitro systems to model cancers is the lack of an appropriately large volume to accommodate the development of this complexity over time. To address this limitation, we have designed and constructed a novel flow-perfusion bioreactor system that can support large-volume, engineered tissue comprised of multicellular cancer surrogates by modifying current microfluidic devices. Key features of this technology are a three-dimensional (3D) volume (1.2 cm3 ) that has greater tissue thickness than is utilized in existing microfluidic systems and the ability to perfuse the volume, enabling the development of realistic tumour geometry. The constructs were fabricated by infiltrating porous carbon foams with an extracellular matrix (ECM) hydrogel and engineering through-microchannels. The carbon foam structurally supported the hydrogel and microchannel patency for up to 161 h. The ECM hydrogel was shown to adhere to the carbon foam and polydimethylsiloxane flow chamber, which housed the hydrogel-foam construct, when surfaces were coated with glutaraldehyde (carbon foam) and nitric acid (polydimethylsiloxane). Additionally, the viability of breast cancer cells and fibroblasts was higher in the presence of perfused microchannels in comparison to similar preparations without microchannels or perfusion. Therefore, the flow-perfusion bioreactor system supports cell viability in volume and stromal contexts that are physiologically-relevant. Copyright © 2015 John Wiley & Sons, Ltd.

Computational and Experimental Analysis of Fluid Transport Through Three-Dimensional Collagen-Matrigel Hydrogels.

A preclinical testing model for cancer therapeutics that replicates in vivo physiology is needed to accurately describe drug delivery and efficacy prior to clinical trials. To develop an in vitro model of breast cancer that mimics in vivo drug/nutrient delivery as well as physiological size and bio-composition, it is essential to describe the mass transport quantitatively. The objective of the present study was to develop in vitro and computational models to measure mass transport from a perfusion system into a 3D extracellular matrix (ECM). A perfusion-flow bioreactor system was used to control and quantify the mass transport of a macromolecule within an ECM hydrogel with embedded through-channels. The material properties, fluid mechanics, and structure of the construct quantified in the in vitro model were input into, and served as validation of, the computational fluid dynamics (CFD) simulation. Results showed that advection and diffusion played a complementary role in mass transport. As the CFD simulation becomes more complex with embedded blood vessels and cancer cells, it will become more recapitulative of in vivo breast cancers. This study is a step toward development of a preclinical testing platform that will be more predictive of patient response to therapeutics than two-dimensional cell culture.

A recapitulative three-dimensional model of breast carcinoma requires perfusion for multi-week growth.

Breast carcinomas are complex, three-dimensional tissues composed of cancer epithelial cells and stromal components, including fibroblasts and extracellular matrix. In vitro models that more faithfully recapitulate this dimensionality and stromal microenvironment should more accurately elucidate the processes driving carcinogenesis, tumor progression, and therapeutic response. Herein, novel in vitro breast carcinoma surrogates, distinguished by a relevant dimensionality and stromal microenvironment, are described and characterized. A perfusion bioreactor system was used to deliver medium to surrogates containing engineered microchannels and the effects of perfusion, medium composition, and the method of cell incorporation and density of initial cell seeding on the growth and morphology of surrogates were assessed. Perfused surrogates demonstrated significantly greater cell density and proliferation and were more histologically recapitulative of human breast carcinoma than surrogates maintained without perfusion. Although other parameters of the surrogate system, such as medium composition and cell seeding density, affected cell growth, perfusion was the most influential parameter.

Preparation and Analysis of In Vitro Three Dimensional Breast Carcinoma Surrogates.

Three dimensional (3D) culture is a more physiologically relevant method to model cell behavior in vitro than two dimensional culture. Carcinomas, including breast carcinomas, are complex 3D tissues composed of cancer epithelial cells and stromal components, including fibroblasts and extracellular matrix (ECM). Yet most in vitro models of breast carcinoma consist only of cancer epithelial cells, omitting the stroma and, therefore, the 3D architecture of a tumor in vivo. Appropriate 3D modeling of carcinoma is important for accurate understanding of tumor biology, behavior, and response to therapy. However, the duration of culture and volume of 3D models is limited by the availability of oxygen and nutrients within the culture. Herein, we demonstrate a method in which breast carcinoma epithelial cells and stromal fibroblasts are incorporated into ECM to generate a 3D breast cancer surrogate that includes stroma and can be cultured as a solid 3D structure or by using a perfusion bioreactor system to deliver oxygen and nutrients. Following setup and an initial growth period, surrogates can be used for preclinical drug testing. Alternatively, the cellular and matrix components of the surrogate can be modified to address a variety of biological questions. After culture, surrogates are fixed and processed to paraffin, in a manner similar to the handling of clinical breast carcinoma specimens, for evaluation of parameters of interest. The evaluation of one such parameter, the density of cells present, is explained, where ImageJ and CellProfiler image analysis software systems are applied to photomicrographs of histologic sections of surrogates to quantify the number of nucleated cells per area. This can be used as an indicator of the change in cell number over time or the change in cell number resulting from varying growth conditions and treatments.

Evaluation of the effect of expansion and shear stress on a self-assembled endothelium mimicking nanomatrix coating for drug eluting stents in vitro and in vivo.

Coating stability is increasingly recognized as a concern impacting the long-term effectiveness of drug eluting stents (DES). In particular, unstable coatings have been brought into focus by a recently published report (Denardo et al 2012 J. Am. Med. Assoc. 307 2148-50). Towards the goal of overcoming current challenges of DES performance, we have developed an endothelium mimicking nanomatrix coating composed of peptide amphiphiles that promote endothelialization, but limit smooth muscle cell proliferation and platelet adhesion. Here, we report a novel water evaporation based method to uniformly coat the endothelium mimicking nanomatrix onto stents using a rotational coating technique, thereby eliminating residual chemicals and organic solvents, and allowing easy application to even bioabsorbable stents. Furthermore, the stability of the endothelium mimicking nanomatrix was analyzed after force experienced during expansion and shear stress under simulated physiological conditions. Results demonstrate uniformity and structural integrity of the nanomatrix coating. Preliminary animal studies in a rabbit model showed no flaking or peeling, and limited neointimal formation or restenosis. Therefore, it has the potential to improve the clinical performance of DES by providing multifunctional endothelium mimicking characteristics with structural integrity on stent surfaces.

A nanoengineered embolic agent for precise radiofrequency ablation.

The purpose of the work is to investigate whether the electromagnetic properties of multi-walled carbon nanotubes (MWCNT) in the presence of radiofrequency (RF) energy is (1) safe, and (2) improves the precision of the therapeutic efficiency of the RF-ablation (RFA) procedure. An in vitro phantom was created for evaluating temperature near RF treated nanotubes. For the in vivo study, three baboons and six pigs were submitted for RFA procedure in superior/inferior kidney poles embolized with a non-adherent, lipophilic embolic agent (marsembol) with or without MWCNT. Tissue damage in the surrounding kill zone was assayed through caspase-3 activation. The in vitro results showed marked heat increase only in the region of the nanotubes. In vivo, necrosis/ischemic damage resulted from RFA therapy alone, RFA plus marsembol only. In marsembol + MWCNT condition, dramatic disruption of cell membranes and sub-cellular organelles was found whereas the nuclear membranes and basal cell membranes remained largely intact. The marsembol vaporized under RFA and tissue fluid filled the space. This caused the MWCNT to cluster within the new aqueous environment. RFA plus marsembol + MWCNT created a well-defined demarcation between healthy and apoptotic cells as evidenced by a marked reduction of caspase-3 expression. By contrast, there was a much less defined ablation zone in the absence of MWCNT. In conclusion, the combination of RFA plus marsembol + MWCNT embolization delineated the kill zone in vitro and in vivo. We demonstrate that MWCNTs remain in the ablation region thus minimizing their migration to the systemic circulation.

Stent effects on duplex velocity estimates.

BACKGROUND: Doppler-derived velocity criteria used to define the presence and severity of in-stent restenosis after percutaneous angioplasty and endoluminal stenting have been called into question. This study uses an in vitro flow model to examine Doppler-derived velocities after placement of balloon-expandable and self-expanding endoluminal stents (BES and SES). METHODS: An in vitro vascular circuit model consisting of a pulsatile pump, tubing, and a conduit was created. The pump was programmed to replicate the Doppler spectral waveform pattern of the renal and carotid arteries. Peak systolic velocity (PSV) and end diastolic velocity (EDV) were estimated at five distinct conduit locations. Three replicate velocity measurements were made at each location. After initial velocity estimates, a BES or an SES was deployed within the conduit. RESULTS: Mean ± standard error PSV was 95.8 ± 2.6 cm/s, 97.0 ± 2.7 cm/s, and 101.4 ± 2.7 cm/s for unstented, BES and SES, respectively. PSV estimates were increased between unstented and stented conduits when SESs were present. The increase in mean systolic velocity of 6.4% observed with SES was statistically significant (P < 0.05). EDV values did not differ significantly across conditions. Mean ± standard error EDV was 36.2 ± 1.0 cm/s, 37.3 ± 1.1 cm/s, and 37.2 ± 1.1 cm/s for unstented, BES, and SES, respectively. CONCLUSION: The presence of an SES was associated with a less than 7% change in estimated PSV. These results suggest that Doppler velocity estimates for renal and carotid arteries are not materially affected by either BES or SES.